pedal erweiterung Brake pedal extension

pedal erweiterung Brake pedal extensionThe problem is when driving swiftly the brake pedal can be pushed far enough below the gas pedal to make it difficult to "heel toe" the between the brake and throttle pedals. Our solution is a solid 3D printed extension that can be installed to make the pedal height more even with the throttle pedal. The extension can be custom made to your desired thickness but most people like 18mm or 25mm thick. To use the extension you will also need some sort of

The problem is when driving swiftly the brake pedal can be pushed far enough below the gas pedal to make it difficult to "heel toe" the between the brake and throttle pedals.

Our solution is a solid 3D printed extension that can be installed to make the pedal height more even with the throttle pedal. 

The extension can be custom made to your desired thickness but most people like 18mm or 25mm thick. To use the extension you will also need some sort of bolt on pedal cover (not included). The pedal extension sandwiches between the factory pedal and the aftermarket pedal cover. Some modification will be required to install as holes will need to be drilled corresponding to the pedal covers you have.

The pedal extension should fit nearly all manual transmission BMW, but please email to confirm fitment as we have only verified on the E36 and E46 chassis.

This part is made to order and is usually able to be shipped within 1 business day.